Blog

New Break Tank Package Booster Sets for Fire Fighting Meet DIN 14462: 2023-07 | impeller.net - The Online Pump Magazine

The latest generation of fully automatic break tank package booster sets for fire fighting of the Hya-Duo D FL Compact type series comply with all requirements of the revised DIN 14462: 2023-07 standard. (Image source: KSB SE & Co. KGaA)

The redundancy, in particular, that is stipulated for the supply of fire-fighting water means that all control and measuring elements now have to be doubled or redundant. The HyaDuo 2 D FL and HyaDuo 2 D FL Compact sets also feature two inlet devices ensuring the hygienic separation of drinking water and fire-fighting water to EN 1717 type AB. Triple Offset Butterfly Valve

New Break Tank Package Booster Sets for Fire Fighting Meet DIN 14462: 2023-07 | impeller.net - The Online Pump Magazine

The effective volume of the break tank is now 600 litres to compensate for any fluctuations in inflow rate and reliably supply the pumps with water for one minute. Newly designed suction elbows allow full use of the tank volume. A ball valve near the bottom of the tank enables the operator to regularly check the function of mains water supply. A window for fill level indication shows the water level at all times.

To facilitate manoeuvring when installing the set, the hydraulic unit can be separated from the tank unit. The master switch is now outside the control cabinet as the new edition of DIN 14462 requires the entire place of installation to be protected against unauthorised access.

In the event of fire, HyaDuo 2 D FL Compact supplies wall hydrant systems with up to 36 cubic metres of fire-fighting water per hour with only one duty pump. The sets have been developed for supplying fire-fighting water to protect multiple dwellings, residential and office buildings, multi-storey car parks and hospitals, for example.

In the event of a lack of water, the new products from KSB now incorporate the option of either stopping the pumps or continuing operation. The default setting is for the pumps to stop if lack of water occurs. The operator can deactivate this function by removing a wire jumper, which means the pumps will keep running even in the event of a lack of water.

The fully automatic break tank package booster set for fire fighting of the type series HyaDuo 2 D FL Compact is fitted with two fully redundant pumps, each of which has got its own power and control circuit. Their redundant control systems continuously monitor pressure switches and limit switches for broken wires and short circuits.

Source: KSB SE & Co.KGaA

In October 2023, KSB Group launched on the market a new submersible pump in discharge tube with open multi-vane impeller. The type series has been named AmaCan D. Its main application is transporting large volumes of municipal or industrial water as well as waste water from stormwater, drainage and irrigation pumping stations.

When aging wastewater treatment plants reach a time when they are in need of upgrading or expanding to meet increasing demands on their capabilities, opportunities arise to consider introducing new technologies to replace old equipment and build new facilities that improve operational reliability.

In response to the transition in power generation from large power stations fired by coal and gas to smaller power stations incinerating biomass or refuse, the KSB Group has developed a new variant of their HGM high-pressure pump that has been tried and tested for 30 years.

The KSB Group launched a new generation of pneumatic 90° quarter-turn actuators. The double-acting and single-acting pneumatic actuators of the ACTAIR EVO and DYNACTAIR EVO type series are designed for actuating all types of part-turn valves, such as butterfly valves, ball valves and plug valves.

Irrigating large areas of agriculture involves the use of vast quantities of water, often at times when temperatures rise and water can be in short supply. To be wholly effective, irrigation needs a controlled and measured programme that ensures equal distribution and conservation.

The global Industrial Pumps Market size was USD 6 Billion in 2022 and is expected to reach USD 99.29 Billion in 2032, and register a rapid revenue CAGR of 5% during the forecast period. Increasing urbanization and industrialization and rising demand for industrial pumps that are energy-efficient and environment-friendly and water and wastewater treatment are major factors driving market revenue growth.

impeller.net – Inform. Select. Buy.

New Break Tank Package Booster Sets for Fire Fighting Meet DIN 14462: 2023-07 | impeller.net - The Online Pump Magazine

Moudulating Valve The international information and sales platform for centrifugal pumps.